Vertical Injection Molding Machine
1, the injection device and the clamping device are on the same vertical center line, and the mold is open and close in the vertical direction. Its area is only about half of the horizontal machine, therefore, converted into an area of about twice the productivity of about.
2, easy to achieve insert molding. Because the mold surface is facing up, the insert is easy to fit. It is easy to realize the automatic insert molding by the combination of the lower die, the movable type of the upper mold, the combination of the tape feeding device and the manipulator.
3, the weight of the mold by the horizontal template support for the upper and lower opening and closing action, will not happen similar to the horizontal machine due to the gravity caused by the mold before the fall, making the template can not open and close the phenomenon. Is conducive to the durability of machinery and mold to maintain the accuracy.
4, through a simple robot can be removed from each plastic cavity, is conducive to precision molding.
5, the general mold clamping device around the open, easy to configure all kinds of automation devices, adapted to complex, sophisticated products, automatic molding.
6, pull belt conveyor easy to achieve the middle of the mold over the installation, easy to achieve automatic molding production.
7, easy to ensure that the resin within the mold fluidity and mold temperature distribution consistency.
8, equipped with a rotating table, mobile table and tilt the table and other forms, easy to achieve insert molding, mold combination molding.